Found during a warehouse cleanup: a flip-down monitor believed to have been used in an RP Stepwgn. It's a Honda Gathers VM-155N, along with mounting brackets, harnesses, remote control, etc., seemingly for an RP Stepwgn. Although the vehicle it was removed from was listed as a Stepwgn, the grade and year weren't specified, and since I didn't remove it myself, the details are unknown. I checked the shape of the mounting brackets online, and it seems to be for an RP Stepwgn. Included accessories are the main unit, trim, harness (08B20-TAA-A000-30, approx. 3.6m), remote control (batteries not included, CR2025), stays (photo 6), 4 monitor fixing screws + 4 screw hole cover caps, and the instruction manual. It includes the often-missing harness, remote control, and screw hole cover caps! The connection terminal to the navigation system is the green 7P connector shown in the last two photos. The door trigger and room lamp power wires have been cut in the middle of the harness, but I've attached tags to the wires for easy identification. I've uploaded photos of the unit in operation. I used a commercially available cable to convert the navigation connection terminal (7P) and connected it to power and RCA video input for testing. The remote control has an "HDMI" button, but please note that this model does not have HDMI input. Regarding the condition, the main unit is gray, so there's some sun fading, but otherwise, there are no major scratches, and it's in pretty good condition. 260105-hk