Thank you for viewing. ⚠️ The images in the 1st and 2nd photos are the items for sale. ︎ ⬜︎ Dice are considered a symbol of success, good luck, and victory. Keeping one close may attract good things, a must-see item. ⬜︎ This is a rear wiper mascot made by modifying a die, to be attached after removing the wiper. ⬜︎ The size uses a slightly large 30mm die. ⬜︎ The logo sticker has a top coat applied, so it will not peel off. ※ Finally, the entire die has been polished for a beautiful finish. ⬜︎ The screw part uses M6 and is offset to hide the base of the wiper bolt, with the included boot completely concealing it. ⬜︎ For positioning the die: ① Base washer 1.0mm 1 piece ② Spring washer 1 piece ③ Boot ④ Adjustment washer 0.3mm 2 pieces 0.2mm 1 piece 0.1mm 1 piece are included. ※ First, on the wiper bolt side, insert in the order of: ① Boot ② Base washer ③ Spring washer and then attach the die. Adjust the position with the spring washer tensioned. If it still doesn't fit, adjust by inserting the adjustment washers one by one. ※ Since the die rotates 1mm per revolution, if the die is facing downwards, inserting a total of 4mm (3mm and 1mm) will bring it within the adjustment range. Please adjust by skillfully combining the three types of adjustment washers. Cut the boot as needed. ⬜︎ If you have any questions, please feel free to contact us.