BMW MINI R60 R61 MINI Crossover Paceman Gauge Pod for Crossover Paceman Additional Meter Holder 52mm This gauge pod allows you to add two additional meters, one on each side of the tachometer. Made with carbon-infused nylon filament (PACF) using a 3D printer, which is resistant to heat and will not deform even in the scorching summer sun. Nylon is heat-resistant, but please understand that some burrs may inevitably occur. To accommodate various 52mm meters, the clearance with the meter is designed to be slightly larger at 52.4mm. If the meter is loose, please fill the gap by applying tape or similar material to the outer circumference of the meter. The holder may interfere with the dashboard when the steering wheel is in the highest position. To install, remove the two T30 Torx bolts and pull the tachometer forward. (The wiring for the original tachometer is connected to the steering column cover and cannot be removed. Please work with the wiring pulled out.) M4 35mm screws are included because the original fixing screws are not long enough.