Leathercraft, Handicraft Hand Press Hole Punching Dies (For M8, imported press machine) Hand press machine for rivets (body), mat not included. 《Set Contents》Accessories ●Sizes: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm Quantity: 1 each, total of 6 pieces ●1 wrench The 6th photo shows the product being sold and the condition it will be sent in. No instruction manual included. ●Photos 1-4 show the leather punched with a die punch. ●Photo 5 shows the screw-type attachment, tightened by hand. When the cutting edge becomes dull, sharpen it like a regular blade. You can easily make holes for belt holes and rivets by simply replacing the die punch of the die press machine, instead of hammering and punching holes. Please make sure the die punch is properly installed before use. If it is loose or not tightened all the way, the die punch may come off, leading to injury, so please use it correctly. A wrench is also included, but you can attach it with your fingers, so you don't need to tighten it too much with the wrench, but it is convenient when it is hard to turn during removal. When using, you need to use a cutting mat under the leather. For M8 imported hand press machines, please check your press machine before purchasing. Many imported press machines are characterized by their rich colors. You can easily make holes with almost no noise, instead of hammering. I personally recommend preparing height-adjusted wood under the left and right sides of the cutting mat, which will stabilize the cutting mat and make hole punching easier and more efficient. Shipped on weekdays via Yu-packet mini