SC⑩ Carbon Fiber Static Discharge Rope Static Discharger / Static Electricity Removal / Static Discharge / Bolt Diameter Φ10mm Set of 5 + 1 Bonus ■ This product is an automotive static discharge rope that applies the static dischargers installed on airplanes. Using ample 48K carbon fiber for the discharge rope, it is attached to the car body or parts of the car to discharge static electricity that accumulates on the car body. It is said that by removing static electricity generated by friction during driving, the original performance of the installed equipment can be demonstrated. ■ Specifications ・ Wire Material: Carbon Fiber 48K ・ Length: Approximately 55 mm ・ Round Crimp Terminal: Stud Diameter Φ 10 mm ■ The carbon of the discharge part is a very thin and easily breakable fiber. Please handle it so as not to touch it as much as possible. ■ Principle of Discharge Applying the principle that a thin, pointed conductor is easy to discharge. Physically, the electric charge generated by electrostatic induction tends to gather at a thin, pointed place. When a lot of electric charge accumulates, the electric field at the tip eventually becomes strong, and discharge begins in the air. This device releases static electricity that has accumulated through extremely fine carbon fibers into the air. ■ Caution ■ This product is completely original, please be aware of expensive similar products from other companies. Also, it seems that there have been police cases between sellers of similar products from other companies over sales methods and evaluations. It seems that some people are seeking detailed information from those who have purchased products in dispute. Please be careful. ＜Reference＞ ■ Static Discharger Airplanes accumulate electric charge on the surface of the aircraft during flight due to collisions and friction with air molecules, water droplets, dust, etc. The electric charge that exceeds the accumulation limit is discharged into the air from the tip, but electromagnetic waves are generated at this time. Strong electromagnetic waves can cause problems with electronic devices. For this reason, a device called a "discharge rope" is installed to discharge static electricity accumulated on the aircraft during flight into the air at a low voltage and intentionally control it. That's all.