【Birdhouse】Handmade Birdhouse This is a handmade birdhouse. (Product Description) 1. The material used is OSB plywood. 2. Since OSB plywood is considered to be weak against water (outdoor use), the outer parts of the birdhouse are coated with two coats of water-based paint (maple color) that is insect-repellent, rot-resistant, mold-resistant, and water-repellent, and then two coats of oil-based varnish. The reason for using OSB plywood is because I felt that the natural wood grain of OSB plywood would blend in with the garden. 3. Two holes (8mm) for attaching strings are installed at the top and bottom of the birdhouse (photos 2 and 3). 4. Four drainage holes are installed on the bottom of the birdhouse (photos 4 and 5). 5. A clasp is installed on the top lid (photos 6, 7, and 8). 6. The approximate size is: back panel height about 30cm, width about 15.5cm, birdhouse depth about 15cm, height to the nest hole about 12cm. 7. Since this is a handmade item by an amateur, it is listed as "slightly scratched or dirty." 8. Please refrain from purchasing if you are looking for a perfect product. Please consider this if you understand. Two strings for installation will be included. #Birdhouse #Birdhouse #HandmadeBirdhouse #Handmade #WildBirds