Compatible models: MAZDA CX-60 (all grades) Set of 1 (turn signal section, back-up lamp section, total of 4 locations) ◎ Cut to match the transparent part of the tail lamp. Just align and apply. ◎ The corners are rounded for cutting to prevent peeling during car washes, etc. ◎ Hard coat film is used, making it scratch-resistant. ● Please apply it in the same way as a glass smoke film. A simple application instruction manual will be enclosed. ● Please prepare a rubber spatula (squeegee), a spray bottle for spraying soapy water, and cellophane tape. We will send one extra piece for practice. ● During the manufacturing process, wrinkles and small air bubbles may be present between the transparent release paper and the white backing paper, but this will not affect the finish after application to the lights. Although cut by machine, small burrs or chips of about 1 mm may occur. ※ Please check the self-introduction before bidding.