3D printed devil-style half mask. This striking design features a white mask with black, curved horns on either side. Recommended for photography, display, cosplay, and Halloween costumes. Please check the photos for the condition. Condition: * No noticeable cracks or chips. * Please understand that layer lines, minor scratches, and scuffs characteristic of 3D printing, as well as traces of adhesion and sanding, are part of the original specifications. * Please refrain from purchasing if you are sensitive to items stored at home. Size (Refer to the measuring tape in the photos - approximate measurements): * Mask inner width: Please check the measurement photo (approximately 15cm). * Horn length: Approximately 12cm along the curve from base to tip. * Overall height: Approximately 23cm from chin to horn tip. * There may be variations due to individual differences and measurement methods. Material & Color: * Material: PLA * Colors: Mask = Off-white / Horns = Black Wearing: * Slits on the back for attaching a belt (rubber band) (see photo). * Belt is not included. Please prepare commercially available rubber bands or Velcro fasteners. Recommended Uses: Cosplay, photo/video shooting, stage props, school festivals, Halloween decorations/displays, etc. Notes: * The tips of the horns are slightly pointed. Please refrain from use by small children. * Storage in high temperatures (inside a car in the summer, near heating appliances, direct sunlight) may cause deformation. * Please purchase only if you understand handmade items. * Returns may not be accepted to prevent product substitution.