SwitchBot Finger Robot Mount Base for Wall Lighting Switches 【For Bottom】 ◆ Product Overview This is a mount base exclusively for the SwitchBot Finger Robot, compatible with Panasonic Cosmo Series Wide 21 (120 x 70mm). It can be installed on the bottom of a two-row vertical switch. ☆☆Caution☆☆ Designed based on the switch plates of Panasonic "Cosmo Series Wide 21". It is NOT compatible with square types (see photo), so please be careful not to make a mistake when purchasing. ◆ Product Contents (Assembled and shipped) Base x 1 Mount x 1 ※ SwitchBot unit is not included. ◆ Material PLA resin (white) Environmentally friendly material derived from plants. ※ Please use indoors as it is weak against high temperatures (40 degrees Celsius or higher). ◆ Installation Method 1. Combine and join the base and the mount part. (The parts are designed to fit together) ⭐︎⭐︎ Assembled and shipped ⭐︎⭐︎ 2. Attach the SwitchBot unit to the mount part. 3. Fit the base into the switch plate. ※ Designed to be a slightly tight fit for secure fixation. 【Notes】 ・ Due to the nature of 3D printers, there may be layer lines. ・ Sanding marks may remain on the surface. ・ Please refrain from purchasing if you are looking for a perfect finish or are concerned about the details.