Thank you for viewing. As the product name indicates, this is a self-made, slim leverless controller. An additional panel for increasing the thickness is also included. The cable is not included. I have confirmed its operation on the PC version of SF6. It has not been confirmed on PS4, PS5, or Switch. It is set to Xinput input when connected via USB while holding L1. (For reference, R1 + connection sets it for Switch, and L2 + connection sets it for PS4.) 【Caution】 While I have made every effort in its creation, due to the acrylic layers, there may be some dust or air trapped between the acrylic sheets. Also, there may be minor scratches on the acrylic itself. The dust and air can likely be resolved by removing the screws and cleaning. To make the air between the acrylic sheets less noticeable, I have used slightly loose screws. Therefore, there may be slight play. If you are concerned, adding the second acrylic sheet from the bottom in image 5 will resolve this. The specifications are as follows: 300mm x 200mm x 12mm (Thickness +2mm when adding the panel) Controller: RP2040-Zero (USB Type-C connection) Firmware: GP2040-CE 0.7.11 Buttons: kailh chocV2 Red switches Button caps: Duelpad button caps