Microcast Spool AMB1518TR Trout Special (Groove Depth 1.8mm) This is a Microcast spool for the ABU Ambassador 1500C series, a Trout Special model. The groove depth is 1.8mm, specifically designed for managed fishing areas and mountain streams. By making the groove shallower than the conventional model and adopting the TR specification, the outermost diameter of the spool has been made lower inertia, allowing it to handle lighter lures. Also, even with the same weight, casting is possible with less force than the conventional model. This model also supports magnetic brakes, and the Microcast Brake AMB1518 is the dedicated magnetic brake. Material: Spool part: Super duralumin (colored by anodizing) Shaft part: Super duralumin (hard anodizing) Microcast Spool AMB1518TR: 5.3g Genuine Spool 1500C: 15.8g Compatible Reels 150Plus, 1500C, 1500C IAR, 1600C IAR, 1601C IAR, etc. Can also be used on OLD (non-IAR) models. Cannot be used on 1500CA Limited. Line Capacity: 8lb φ0.235mm 25m 6lb φ0.205mm 35m Microcast Brake AMB1518 Since the brake unit is not attached to the spool body, it prevents an increase in the weight of the spool body. The magnetic brake body can adjust the distance to the brake disc using a screw system, allowing for fine adjustment of the braking force. Basic Specifications Material: Body: Polyacetal resin (POM) O-ring: Nitrile rubber Magnet: Neodymium magnet φ4×3 4 pieces Weight: 5.5g Price negotiations are not accepted.