Epiphone's top-of-the-line pickup, the "ProBucker." Featuring a ProBucker 2 in the neck position and a ProBucker 3 in the bridge position, this combination delivers the highest-grade sound in Epiphone history at this price! Based on the BurstBucker 2 and 3, which are also installed in Gibson's top-of-the-line Historic Collection models, their sound is guaranteed! I've also installed them on my own guitar, and I could hear that smooth, yet sometimes powerful, vintage humbucker sound. The neck pickup has a clear, sweet, and sticky tone. The bridge pickup delivers a well-defined tone whether you're using a crunchy sound or heavily distorted. The bridge pickup's clean tone is also excellent. Coil tapping is also possible using the included wiring harness, allowing for a wide variety of sound making, from single-coil sounds to thick humbucker sounds. The lead wire length is 34cm for the neck pickup and 25cm for the bridge pickup. The output is approximately 7.6k for the neck pickup and approximately 8.45k for the bridge pickup (may vary depending on room temperature and individual units). Everything in the images is included. * 2 Pickups (+ 2 Escutcheons) * Pre-wired harness with coil tap (tap by pulling up the volume pot) * Nuts and washers for the jack, toggle switch, and all pots, and various mounting screws are included. * And all have been tested for electrical conductivity. The string ground is usually soldered to the back of the volume pot, but it's sufficient to simply wrap it around the ground part of the pot (lead wire, etc.) without soldering. This product comes with black escutcheons and toggle switch knobs. If you prefer flat black, please contact us after purchase. Otherwise, we will ship with curved ones. Please note that this batch may not include the manufacturing code stickers on the back, as is the case with direct sales.