AnyCast is a wireless HDMI receiver that allows you to share and watch videos from your smartphone on a monitor via Wi-Fi. It supports iPhone, iPad, and Android devices. ⚠️A Wi-Fi environment is required for connection⚠️ #Various Adapter Pickups How to connect an iPhone 1. Plug the HDMI connector into the TV's HDMI port, and the USB connector into the TV's USB port or a power port if there isn't one. 2. Plug the micro USB connector into the AnyCast unit, and switch the TV input to HDMI. 3. The TV screen will display "Waiting for connecting". Press the button on the AnyCast unit to switch to a screen with a QR code. The SSID: AnyCast ⚪︎⚪︎×× is displayed above the QR code, so select the same one from the Wi-Fi network settings on your iPhone and connect. Even if a message like "Not connected" appears, proceed to the next step without worrying. 4. Scan the QR code or enter the address 192.168.49.1 in Safari. Tap the Wi-Fi icon at the top. 5. Your home access point's SSID will appear, enter the password and connect to Wi-Fi. 6. Next, on iPhones with a home button, swipe up from the bottom of the screen, and on iPhones without a home button, swipe down from the top right to display the Control Center. Tap Screen Mirroring, then tap Anycast Mirroring → the iPhone screen will be reflected on the TV. How to connect an Android device Perform steps 1 and 2 above for iPhone. The TV screen will display "Waiting for connecting". Then, operate your smartphone. From the settings, tap on items related to connection, such as "Device connection" or "Connection and sharing", then tap on items like "Cast" or "Mirroring". The AnyCast connection code will appear, and connecting to it will reflect your smartphone screen on the monitor. If it doesn't appear, resetting the AnyCast unit by long-pressing the button or turning the power on and off often improves the situation. ⚠️Please read the above instructions carefully regarding connections. We cannot answer questions about individual models, so please be aware of this.