White automatic dispenser, the ZBD-G012 model, convenient for liquids. It's sensor-activated, dispensing liquid when you hold your hand near it. This item is very convenient for dispensing liquid soap without touching it, especially when your hands are wet or dirty. When the green lamp is lit, the liquid soap is dispensed correctly. When the lamp flashes red, it indicates that the battery is low, so you can replace the batteries and use it again. You can choose from 3 levels of liquid volume. If you want to adjust the amount of liquid soap to suit the situation, you can dispense the right amount from the 3 levels. There are three levels: weak, medium, and strong, and you can adjust the amount of liquid by adjusting the number of times you press the button. Easy battery replacement and soap refill. If the bottle opening is narrow, it can spill during refilling. The ±0 auto dispenser has a wide tank opening, making refilling easy. It's easy to wash, so you can always keep it clean. The ±0 auto dispenser series has been renewed with a new "cleaning mode" to keep the nozzle clean. As a new feature, it is equipped with a "cleaning mode" that automatically cleans the nozzle. To use it, fill the empty tank with lukewarm water (30°C to 40°C) and, with the power on, press and hold the power button for about 5 seconds. It will dispense continuously for about 10 seconds. By passing lukewarm water through it, the inside of the nozzle is cleaned, making it easy to change soaps or clean it regularly. Specifications Details Item Details Brand ±0 (Plus Minus Zero) Regarding the product Size: W70 x D135 x H198mm Weight: 330g Material: [Body] Resin [Tank] AS Capacity: 250ml Country of Origin: China Regarding handling 【Rating】 [Dispensing volume] 3 levels (Weak: 1ml, Medium: 2ml, Strong: 3ml) [Body waterproof level] IPX4 (Splash-proof, the top of the body cannot be washed) Requires 4 separate AA alkaline batteries 【Cleaning mode】 ・Empty the tank, fill it with lukewarm water (30-40°C), and with the power on, press and hold the power button for about 5 seconds. ・It dispenses continuously for about 10 seconds, and the inside of the nozzle is cleaned by passing lukewarm water through it. ・Press the power button to stop it in the middle. ±0 | Auto Dispenser (Liquid)