~Handmade~ Polymer Clay Cutter *Heart Irregular Cutout 30mm Mirror Set* Color: Random This polymer clay cutter is made using PLA filament. An asymmetrical, irregular heart-shaped cutout design, a mirror set for symmetrical pairs, perfect for making pairs of earrings, etc.*˖⋆ The cutout part is 20mm. The cut-out hearts can also be used, ᵍᵒᵒᵈᵎᵎ 0.4mm edge for a clean cut, smooth processing after cutting and baking.*˖⋆ Rounded base that is gentle on fingers.*˖⋆ Size: Approximately at the largest part Design part 30mm Height 15mm Color: Random · · • • • ✤ • • • · ·· · • • • ✤ • • • · ·· · • • • ✤ • • • · ·· · • • • ✤ • • • · · PLA filament is a material developed based on plant-derived PLA resin - mainly made from natural materials such as corn, potatoes, and tapioca, it is a plant-derived biodegradable bioplastic. This product uses high-purity, high-strength PLA/PLA+ filament.*˖⋆ ☆3D printing builds up by layering melted filament - We create settings to minimize the appearance of layer lines, but please understand that there may be areas where there are shifts, burrs, layer lines, and stringing. ☆When using, especially cutters with fine designs, apply cornstarch, etc., to the cutter when cutting, or remove the mold by pressing and removing it a few times little by little instead of all at once, making it less likely to stick to the mold and easier to remove. ☆Due to the nature of the product, clay may enter the layers. Please wipe it off using a soft brush or cloth without applying force. ☆Although it is a strong and tough material, please be careful as excessive force, especially from the horizontal direction of the layers, may lead to damage. ☆PLA filament is generally sensitive to heat and softens even at low temperatures of around 60°C, so please be careful about the temperature when washing - Dishwashers cannot be used. #akikaClayCutter #PolymerClay