I made these again because the previous ones sold immediately. Flathead saddles for ABR-1 bridges. Made of brass, pre-grooved. Flat saddles were also used on Jimmy Page's Les Paul, and this product was made for converting a so-called Japan vintage Tokai Les Paul to Jimmy Page specs. Therefore, it is a millimeter standard. About flathead saddles: These saddles were used from around the time ABR-1 became wired until the Nashville bridge was adopted. Compared to a regular bridge (right side in photo 3), the contact area between the strings and the saddle increases, which suppresses the high frequencies, so when installed on a Flying V or Firebird, the unpleasant high frequencies disappear, and the sound becomes thicker and sweeter. Also recommended for those who want the sound of a 60s-70s Les Paul or SG. If you are not satisfied with pickup replacements, you might feel a change by changing the bridge or saddle. Vintage Maniacs previously published a feature article, which is also interesting. ⚠️The bridge in the photo is not included. #gibson #fender #PRS #Epiphone #zemaitis #ESP #Gretsch #Rickenbacker #Suhr #tokai #Fernandes #Fujigen #Greco #electricguitar #guitarrepair #guitarparts #guitarcraft