3D printed items for sale. 3D printing service Printing time: ¥900 per hour, Modeling also available from ¥900! ✅ Pricing determined solely by printing time! Ultra-simple pricing structure ✅ ¥900 per hour ¥900 for the first 60 minutes, then ¥15 per minute thereafter. Please refer to the images for estimated printing times. *¥900 minimum charge even if printing takes less than 60 minutes. *Printing time is determined by Bambu Studio slicing software. Slicing results will also be shown on a dedicated page. ✅ Filament and shipping costs included. ✅ For those who want 3D modeling ↓ Simple models that can be created by combining 2-3 shapes will be modeled for an additional ¥900 on top of the printing fee. Please contact us if you don't know the dimensions or want to discuss the shape. Additional fees will apply for complex shapes. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ If you would like to have something printed, please contact us in the comments. We will create a dedicated page. Also, if you have a model you want to print, please write it in the comments. *Printing of data protected by copyright is not possible. *Most models published on the internet, etc., are not available for commercial use, so please be aware that we cannot print them. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ ーーーーーーーーーーーーー Equipment used: bambu lab A1mini Printable size: 180 x 180 x 180mm Filament: PLA matte black, PLA matte blue ーーーーーーーーーーーーー ✅ For those concerned about surface accuracy ↓ The bottom surface can be changed to a smoother plate. The standard nozzle size is 0.4mm, but it can be changed to 0.2mm (printing time will be longer). The layer thickness is 0.2mm, but it can be changed to 0.08mm (printing time will be longer if thinner). These changes are available at no additional charge! 3D print order 3D print request