Thank you for viewing. This guitar is a combination of a different guitar's neck and body. Body: Aria Pro II MA-38, Ash Neck: Aria Pro II Wildcat, Rosewood fingerboard 22 frets Weight: Approximately 3.6kg The MA-38 body is a model from the mid-1990s. Although the body is ash, the original neck wasn't very well-made, so a different neck was attached. The neck is from a Wildcat model from the mid-1980s, made in Japan during a period of high-quality craftsmanship. Because simply attaching the neck to the body would cause buzzing even after bridge adjustments, a brass shim was inserted to adjust the angle. As a result, there is a slight gap at the neck joint. Currently, the string height is adjusted to approximately 1.2mm for both the 1st and 6th strings at the 12th fret. Octave adjustment has been done. The pickups are a single-size humbucker in the neck position. The bridge pickup is a covered humbucker with moderate power, around 11k ohms. The 5-way selector has auto-tap wiring in the half positions (humbuckers become single-coil on one side). Clean tones are very usable in each position. It's a guitar similar to a Yamaha Pacifica, capable of handling a wide range of genres. It may be slightly underpowered for metal, so replacing the bridge pickup with a high-gain one is recommended. There are no issues with the sound. The tremolo arm is missing. A standard Stratocaster-type arm with a 5mm screw will fit. There are fine scratches overall. Not all scratches have been photographed. Please consider this a used item before purchasing.