Ibanez premium RGT1221PB Mod, Non-tremolo, Stainless frets, Luminlay diameter upgrade, Rear direct switch Please refrain from comments regarding price reduction. The Luminlay was dim, so it has been changed to 3mm diameter blue. In that process, the paint on the 5th and 9th frets became thin and whitish. Clear coating has been applied over the thinned areas. The ground is concentrated to one terminal with a ground lug in the cavity. The strap pin on the neck side broke, so there is a repair mark from when it was removed. The set screws were too high and painful during bridge muting, so some of the saddle set screws have been replaced with lower ones. Wrenches etc. are in the gig case pocket. Due to the thin poplar veneer on the surface, there are fine scratches and dents. Stainless frets, so the frets are almost unworn. dyna-MIX10 has been removed and changed to a 4-circuit, 5-position mega switch. The selector is, from the rear side: rear humbucker, rear and front coil tap mix, rear + front, front parallel, front humbucker. The mini switch, when raised, bypasses the volume and tone regardless of the selector position and becomes the rear direct switch, which activates the rear humbucker.