Introducing the Epiphone Genuine ProBucker Mini Humbucker Set. Similar to the FB720, which has no pole pieces, these humbucker pickups are made in the ProBucker specification but in a mini-humbucker format. The nickel cover gives it a vintage feel, and the adjustable pole pieces allow for volume adjustment of each string. These are made with authentic construction using Alnico magnets, not the typical ceramic magnets. The lead wires also use braided wire, making them comparable to the genuine Gibson mini-humbuckers. Lead output is Neck: approximately 6.4-7k, Bridge: approximately 7.5-7.8k. This varies with room temperature. Lead wire length is Neck: 320mm, Bridge: 260mm. Cover size: Width: 68mm, Height: 28mm, Depth: 15.7mm (excluding feet) The pole piece pitch is Gibson pitch for both neck and bridge, at 49.2 mm (center to center from the 1st to 6th string). The screws are metric. We've included a separately obtained metal escutcheon to enhance the vintage look. This alone would cost a considerable amount. Other included accessories are elevation screws and screws. Please note that the product code sticker on the back may not be attached depending on the stock situation. The transparent protective sheet on the top surface may or may not have printing. You cannot choose which one you will receive, as it depends on the stock situation.