Printer cable (IEEE1284, 2m) Printer cable using a 25-pin D-sub connector. - Connector type: 25-pin D-sub connector - Cable type: Printer cable - Brand name: Thank you for viewing. Cable to connect DOS/V computers and printers. IEEE1284, 2m. 　fufu KPU-IEPS2K JAN code 4969887550144 Standard price ¥2,970 (excluding tax ¥2,700) Centronics Parallel port Sanwa Supply Cable length 2m Connector shape D-sub 25-pin male inch screw (4-40) - Centronics 36-pin male Cable diameter 8mm Cable standard UL20276 ■Features This cable connects DOS/V computers and printers. It can also be connected to printer switchers and buffers. It complies with the IEEE1284 standard and supports full-duplex communication. It uses a 62Ω impedance cable that enables high-speed transmission, and is an IEEE1284 cable that supports ECP/EPP bi-directional communication. It is a double-shielded cable with a sealed aluminum shield treatment inside a copper high-density braided shield material, protecting important data from most noise from low to high frequencies. Twisted pair wires, which are resistant to noise, are used, with two cores twisted together. The internal part is solidified with resin molding, and the mold connector is fully shielded, preventing external interference and providing perfect noise countermeasures. It also has excellent vibration and impact resistance. A ferrite core with a noise filter function that effectively absorbs noise transmitted from the cable is installed. Pins (contacts) with gold plating, which are resistant to rust and less likely to cause signal degradation due to aging, are used.