⭐ Half-Size Chair Cover This is a cover for a chair made from milk cartons (cover only). ☆ 150 yen discount for combined shipping of covers. ☆ The photo shows it placed on a chair reinforced with cardboard top and bottom (finished size height 12cm). Please understand that it has been put on and taken off for size confirmation and photo shooting, including the elastic. ◼ This is half the height of a standard chair made with 24 1-liter milk cartons, resulting in a height of 20cm. [Cover Size] The seat surface is a hexagon with a side length of approximately 15cm, and the surrounding length is approximately 90cm, so please check the size. ◼ Medium-thick cotton fabric ◼ The underside of the seat fabric is quilted fabric. ◼ Edges are finished with a zigzag stitch, etc. ◼ Corners of the seat where stress is applied are reinforced with backstitching. ◼ Elastic replacement opening included. ⚠ For washing, we recommend gentle hand washing, light spinning, and air drying in the sun. * Since we use the fabric efficiently, there may be selvedge holes on the back. There may also be chalk marks on the back (which will disappear with washing). * Please refrain from purchasing if you are particular about colors, as they may differ from the actual color due to the shooting environment, etc. Although carefully made, this is a handmade item by an amateur using a home sewing machine. We appreciate your understanding and consideration. m(_ _)m Handmade Chair Cover Floor Chair Cover