Used Ice Drill Electric Bearing Adapter Long The hexagonal mounting part of the electric drill is worn and rounded. It can still be used if the chuck is tightened firmly. New drop-prevention mechanism! Easy ice hole drilling with an electric drill. An adapter that connects an ice drill and an electric drill. Remove the ice drill handle, insert the Ice Drill Electric Bearing Adapter, and then you can drill ice holes with the electric drill. The drop-prevention mechanism has been redesigned from the previous model for even greater safety. The drop-prevention bar has a soft-touch EVA cover that is resistant to freezing. A built-in bearing prevents the drop-prevention bar from rotating with the drill, ensuring safety. Available in three lengths: short, long (convenient for thick ice fields), and super long. The long version has 5-stage length adjustment, and the super long version has 7-stage adjustment. The electric drill chuck part is compatible with 10mm. Can also be attached to the MORA standard folding handle. Made of nickel-chromium-molybdenum steel (SNCM439), which has the highest strength among alloy steels. *When penetrating the ice, attach the drill so that the chuck claws fit into the slits to prevent the drill from falling out. (Even if not attached correctly, the ice drill will rotate, but it will fall out when penetrating the ice.) *Impact drivers cannot be used. *Recommended to use a drill with 18V or more and a maximum torque of 70 N·m or more. Thank you for viewing.