Thank you for viewing. Purchased this month (January 2024), stored at home. The actual package is in the first photo. Retail price: 3850 yen ↓ The following is a quote: 【Product Features】 For the love of creators' works, This resin liquid achieves high quality and low price, made in Japan!! ■ Less shrinkage than any other resin liquid. Therefore, it is less likely to wrinkle. Even with diamond silicone molds, which are the most difficult to create, you can clearly express the sharp points and unevenness. Perfect for mineral works. ■ Smooth, low viscosity for easy handling, making it difficult for bubbles to enter and easy to remove. ■ Does not become sticky after curing, and hardens firmly. ■ Excellent transparency and is less likely to yellow. ※ During curing (while the resin liquid is reacting under UV or LED light), it appears yellow, but it becomes transparent when the reaction is complete. ■ The smell is mild! We have reduced the pungent smell unique to resin! (There is a small amount of smell. If you are concerned, please ventilate well while using the resin.) ■ Hardens well even in sunlight. Although discoloration unique to resin may occur due to aging, there was no change in the experiment even after 3 months. 【Notes on Lights】 This is a one-component resin that cures with UV-LED lights (405nm wavelength) and UV lights (365nm wavelength). When using an LED light, a wavelength of either "405nm" or "365nm" is required. Please also be aware of light deterioration, as the waveform of the light itself may become unstable due to differences in manufacturers and aging, resulting in longer curing times or incomplete curing. 【Curing Time】 ● UV-LED light (when using 6W～9W) 60～120 seconds ● UV light (when using 36W) 2～4 minutes (Varies depending on the thickness of the work and the season) ※ When using general resin colorants, irradiate for longer than the above time. The curing time will be longer as the resin becomes thinner. ※ If the work is thick, turn it over and irradiate with light to fully cure.