This is a clear, glossy soft film for the main screen and back of your device. It's a soft film that you apply using a spatula, resulting in a very clean finish. TPU material film DIAMOND MAX series If you're looking for other types → #kiriGalaxyZflip3 Compatible models: Galaxy Z flip 3 (SC-54B / SCG12) Accessories: Wet sheet, dry sheet, dust removal sticker, application spatula, video QR code ★ Immediate purchase without comment is OK. Silence after purchase is also OK. ★ Regular mail is currently not delivered on weekends and holidays. If you are in a hurry or wish to remain anonymous, we will accommodate Mercari mail for an additional 100 yen, so please contact us before purchasing. ■【Tips for application】■ The film structure is, from the top: ・Protective release sheet for the film ・Film body ・Adhesive surface protection sheets ②③ of the film body ・Cardboard sheet ① protecting the surface for temporary application of ②③ ♪ Camera, sub-screen area (top/bottom) 1. Peel off from the cardboard ① * Since the film has multiple layers, peel off all of them (3 layers) together. (Don't worry if fingerprints get on it) 2. Cut out the camera lens part 3. Temporarily place the film according to the lens * You can redo this as many times as you like 4. From here on, the real deal. Raise the right half at a right angle. 5. Peel off the protective sheet from the sticker from the center of the film and apply it to the right using the spatula. 6. Lift the remaining left half and apply it to the left with the spatula in the same way. 7. Finally, peel off the protective sheet on the surface. * Be careful not to forget to peel it off ♪ Hinge part (SIDE FILM) 1. Same as 1. above 2. Align the position and temporarily place it. 3. Same as 4. onwards, but fingers are better than a spatula ♪ Bottom of the back Basically the same as above, the real deal is to raise it at a right angle, divided into top and bottom. It's easy to peel off if you pinch the ②③ parts. ♪ Main screen Basically the same as the bottom of the back. ① is easier to peel off. Please check the video with the QR code. ※ Please do not lift the applied film and reapply it in an attempt to eliminate air bubbles during the actual application. Minor air bubbles will disappear in a few days. ※ There may be lines in the center of the film, but they will become thinner in a few days.