Unused product. 【High-Quality Material + Heat-Resistant Pad】The reinforced silver PLUS fabric not only has waterproof and water-repellent properties (water pressure resistance of 3000mm), but also solves the problem of the heat-resistant pad falling off or peeling off thanks to the sewing of a large heat-resistant pad, shortening the cooling waiting time for the motorcycle's engine and exhaust system. In addition, unlike other companies, instead of directly sewing fabric coated with UV paint on one side to the inside, we use an original design where fabric made from threads pre-impregnated with UV paint is applied to the outer layer that is exposed to direct sunlight. This prevents the UV coating from adhering to the vehicle body due to high temperatures or aging, and also improves UV protection, heat resistance, and durability! 【Innovative Design】: There are 3cm wide handles (2 on the handlebar side, 1 on the seat side) on the front and back, so you don't have to worry about getting your hands dirty when putting on or taking off the cover, and it can be stored compactly. Furthermore, the design integrates fluorescent reflective tape, making it easy to see the position of the handles in dark places or at night. 【Moisture Control】: Depending on the usage environment (after driving, rain, snowfall), there may be a temperature difference between the inside and outside of the cover, and water vapor tends to accumulate. If used as is, it can lead to rust on the vehicle body, mold on the cushion, and aging and deterioration of rubber parts. COOBIKER has designed air ventilation on the upper left and right sides of the front of the cover, and when in use, you can simply peel off the Velcro to exhaust the moisture accumulated inside without letting in rainwater. 【Safety】: By adjusting the fixing buckle in the center of the lower part of the cover, it fits the vehicle body and helps prevent wind from blowing it away. The cover comes with two additional fixing belts (size 2.5 x 230cm). Including the front and rear handles, there are four fluorescent parts (reflective material) on the entire cover that serve as warnings and alerts, making it easier for other vehicles to see and minimizing collisions when parked. In addition, rubber hems are used for the front lock holes, which are more durable and easier to attach and detach than metal ones, and do not rust.