It has come to our attention that our photos, descriptions, and product names have been copied and used by others. We offer no guarantee regarding the materials or durability of the items offered by the aforementioned parties. If the quantity listed is acceptable, you can purchase immediately. If you desire a different quantity, please inquire. The shipping cost will decrease if you purchase a larger quantity. (However, the change in shipping cost is minimal unless the quantity is significantly large.) By making the connecting part in the middle a sphere, the head can now tilt and nod 360 degrees. When attached, it is completely invisible from the outside, but the color is slightly darker than Whity. Please be aware of this. This is a prototype neck kit for connecting Obitsu 11 bodies and Nendoroid heads. Each one has been inspected to ensure it does not fall out. Remove the neck joint from the Nendoroid and replace it with this kit. (You will need to open the upper body of the Obitsu 11 body.) No modification is required for this product itself. It can also be used with Nendoroids from the 300 series and earlier, which have attachable joints. For Nendoroids from the 300 series onwards, please use it by inserting it into the joint that comes standard with the Nendoroid. (You will need to remove the shaft attached to the default joint.) It will not fall out even if turned upside down. You will receive only the two kits shown in the first photo. Other items are not included.