SUMI Guitar Parts offers high-quality products that "meet a certain level of quality," drawing on experience working at musical instrument stores and guitar construction & repair. This is a bushing to fix the bridge (preventing it from moving back and forth) for Jazzmaster, Jaguar, Mustang, and other guitars. "1 set (2 bushings)" The sizes are: bridge post side diameter 6.5mm, anchor side diameter 8mm, flange diameter 13mm, and flange thickness 1.5mm. Notes: Some guitars may fit these bushings easily, while others may not fit quite right (too tight or too loose). If they don't fit, please try the following: If too tight: ・Apply lubricant to the bushings and bridge posts, etc. If too loose: ・Wrap masking tape around the bridge posts, etc. *We cannot accommodate installation issues due to the guitar's own precision (individual differences). For example, on guitars where there is a large discrepancy between the bridge hole on the pickguard side and the bridge hole position on the guitar body side, the bushing flange may interfere with the pickguard and not install properly (it may be possible to install it by shaving the flange). *Please be sure to check the bridge dimensions of your guitar carefully before purchasing. Shipping is free and will be via Yu-Packet (postal delivery with tracking service) only. *We cannot accept requests for other shipping methods without tracking services to prevent mutual trouble. #Jaguar #mustang #jazzmaster