【Effective in Noise-Prone Environments】This is useful in situations where you are troubled by noise when using passive microphones, such as when the output level of the microphone is low, the preamp being used has a lot of noise, or as a countermeasure against noise picked up by long cables. It is highly valued in live stages and recording studios. Also, because it can boost the microphone signal immediately after the sound source, it has the effect of suppressing noise, and is also effective for XLR lines of acoustic guitars. ✅【High-Quality Preamplifier】The "Cloudlifter CL-1" is a standard model in the Cloudlifter series released by Cloud Microphones, which has overwhelming support as a microphone booster. It is an in-line microphone preamplifier that uses phantom power (48v) to convert to a maximum of +25dB of ultra-clean gain and boost the audio signal. ✅【Up to 25dB Amplification While Maintaining Clarity】Adds up to 25dB of gain to low-output passive microphones such as dynamic microphones and ribbon microphones. By amplifying the microphone signal before it is input to the preamplifier while maintaining clarity, it maximizes the original performance of the microphone. ✅【Easy - Just Connect!】The usage is very simple: connect it with an XLR cable between your audio interface and microphone, and finally turn on the phantom power switch of the audio interface. This alone can significantly increase the volume of a passive microphone that was previously quiet. ※Note※ This unit requires phantom power. ✅【Features】 ・Usable for low-output passive microphones such as dynamic microphones and ribbon microphones ・Amplifies the output passive microphone signal up to 25dB using phantom power ・Durable and portable, suitable for use in studios, stages, and broadcasting stations ・Significantly clean and amplified audio signal ・Ideal for direct recording with a DAW using a low-output dynamic microphone. ・Protects delicate ribbon microphones from damage by not sending phantom power to the microphone side.