Projector. It's an older type. It works normally. 2000 lumens. Shows signs of use. There are some scratches and dirt. There are no problems with use. You might try outputting from a DVD or computer. Main unit Remote control (requires 2 AA batteries) Power cord AV cable VGA cable Main unit case Manufacturer: Epson Manufacturer reference: EMP-82 I Number of lithium-ion batteries: 1 Item weight: 3.01 kg Product introduction After using the projector, you can unplug the power cord without pressing the power button to cool down. You can store it in the carrying case immediately after use, without waiting for the cool-down, which usually takes 20-30 seconds (compared to our company). Equipped with 4 video input terminals that can simultaneously connect up to 4 input devices, such as 2 PCs and video. This saves the trouble of switching input devices. Built-in 5W speaker, sufficient volume can be played even in a room where about 30 people gather. Reduces the need to prepare external speakers separately. You can give presentations with sound using only the main unit. Just turn on the projector and place it, and it will detect the tilt of the main unit and automatically adjust the trapezoidal distortion of the projected screen. This reduces the time and effort required for setup. Equipped with a direct power-on function that starts projection just by plugging the power cord into an outlet. The adoption of a "single leg" allows you to easily adjust the height of the screen with one hand. There is no need to perform difficult horizontal adjustments, reducing the effort of setup. Color: Silver Maximum brightness: 2000 lumens - less than 2500 lumens Aspect ratio: 4:3 4K support: No 4K support HDMI terminals: No HDMI terminals