BLAM 3-inch baffle LFR80, S 3N50, MS3Multix MB3, etc. for front 3-way speaker creation! Image 2 shows MB 3, and image 3 shows LFR80 installed. This has approximately a 1mm gap for the fabric. Since the depth of the chamfer is about 5mm, which is the thickness of the speaker, when creating, soak the rising part with instant glue, shape it with putty or jersey cloth, and then shave it off at the final putty stage for an easier, crack-free process. If you purchase the units at the same time, they will be included for 3000 yen. Currently, there is one last set of the rare MS3 Multix available.