Outlet pickups purchased for maintenance. I have extras, so I'm selling them. ※The images are samples. The color and appearance of the cables may vary. If the cable insulation is damaged, it may be protected with heat shrink tubing, so please be aware of this. Although they are unused, they are outlet items and may have scratches, dents, rust, chips, peeling, paint lifting, uneven finishing, etc., due to transportation, storage, or manufacturing. Please do not purchase if you are looking for a pristine item. I find them useful because they are inexpensive and reasonably functional. The resistance value varies depending on the lot, so please inquire if you have specific requirements. There will always be some error. Screws and springs are included. They have sufficient output, a 4-conductor cable, and short legs for versatility. ※Please install pickups and other parts at your own risk as it is considered a modification. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. Due to imported goods, the purchase price and individual specifications will vary depending on the time of purchase, so the images are samples and the exact same item will not be delivered, and the price will also fluctuate. Please do not purchase if you are concerned about minor details such as "it used to be like this," and we will not accept returns for minor issues unless the item is unusable. The color of the cables, cords, and other parts will change from time to time. Please ask questions beforehand and make sure you are satisfied before purchasing regarding details such as whether the pole pieces protrude from the back, their length, etc. Some adjustable pole pieces may not have screw threads, so height adjustment can only be done by pushing from the front and back. The specifications of the mounting screws (pan head or oval head), length, spring shape, etc., are also constantly changing, so the same items cannot be provided. The ears for attaching the screws may bend during shipping, but they can be bent back, so please correct them yourself before using. Metal will break if bent repeatedly. The covers may come off from the base plate due to the solder coming loose during shipping, so please attach them yourself.