【SHURE Genuine Microphone Holder A25D (Unused)】 "This product has a screw diameter of approximately 15mm, which is 【5/8 inch (SHURE standard)】. It can be directly attached to a general microphone stand, but please note that if you are using a stand with a thin screw (3/8 inch), a separate conversion adapter is required." This is a genuine SHURE microphone holder that came with the purchase of a microphone. Since I don't use a stand, I have kept this one carefully stored, unused. With its robust construction, typical of genuine products, it securely holds your valuable microphone. ■ Product Condition Since it is an unused item, there is no sign of use or wear on the screw threads. The logo engraving is also clear, and the overall condition is very clean. I have confirmed that the angle adjustment screw operates without any problems before listing. ■ Specifications (Please be sure to check) Screw Standard: 5/8 inch (approx. 15-16mm) Can be directly attached to 5/8 inch standard microphone stands such as SHURE and TAMA. * A conversion screw to 3/8 inch (AKG standard) is not included, so please check your stand. ■ Compatible Microphone Examples SHURE: SM58, SM57, BETA58A, BETA57A, PGA48, PGA58 Also widely compatible with dynamic microphones with a diameter of approximately 20mm to 35mm. Instant purchase is OK. I will protect it with cushioning material and ship it quickly. #SHURE #Shure #MicrophoneHolder #A25D #SM58 #SM57 #BETA58A #Unused #LiveEquipment #Recording #DTM