Double-blade humbucker using Alnico 5 magnets, 4-conductor wiring. This is an outlet pickup purchased for maintenance. I'm selling it because I have extras. ※The images are samples. The color of the cable and appearance may vary. Please note that if the cable sheath is torn, it may be protected with heat shrink tubing. Although it is an unused item, it is an outlet item and may have scratches, dents, rust, chips, peeling, paint lifting, uneven finish, etc. due to transportation, storage, or manufacturing. Please do not purchase if you are looking for a pristine item. I find it useful because it's inexpensive and reasonably functional. The resistance value varies depending on the lot, so please inquire if you have specific requirements. There will always be some error. Screws and springs are included. ※Please install pickups and other components at your own risk as it is considered a modification. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. Due to imported goods, the purchase price and individual specifications will vary depending on the time of purchase, so the images are samples and the exact same item will not be delivered, and the price will also fluctuate. If you are concerned about details such as "it used to be like this," please do not purchase it. We do not accept returns for minor issues unless the item is unusable. The color of the cable, cord, etc. changes from time to time. If the length is insufficient, please add to it. Please ask questions beforehand and make sure you understand the details, such as whether the pole pieces protrude from the back, the length, etc., before purchasing. Some adjustable pole pieces may not have screw threads, so height adjustment can only be done by pushing from the front and back. The specifications, such as the shape of the screw heads (pan head or oval head), length, and the shape of the springs, are constantly changing, so the same items cannot be provided. The mounting ears for the screws may bend during shipping, but they can be bent back, so please correct them yourself before use. Metal will break if bent repeatedly.