New Snow Peak Shell Container 25 Compatible Folding Legs Shellcon Leg 25, Khaki x Black By attaching these parts, the height will increase by approximately 10cm when the legs are extended. It's not placed directly on the ground, but is foldable, so you can unfold the legs and use it, stack them, and fold the legs for compact storage! When storing the leg pipes, they are fixed to the bottom with magnets, allowing for stacking and direct placement. Color: Khaki x Black Size: Shellcon 25 (Shelf Container) exclusive Material: Nylon resin, aluminum pipe *The Shellcon 25 (Shelf Container) body must be prepared separately by the customer. The installation method is easy, so there are no instructions. First, insert a flathead screwdriver between the push nut of the original bottom leg fitting and the shelf container, and gradually move the push nut to remove it. Next, fix the four leg parts with the included screws. That's all it takes to install the leg parts. Next, remove the lower leg rubber fixed with a Phillips screw on the inside bottom of the shelf container. Next, insert the leg pipes into the leg parts you just installed, in a folded shape (legs closed), and fix them with bolts and nuts. Also, the included magnet parts are attached to the leg pipes, and these magnets fix the leg pipes to the bottom when stored. #Shellcon #ShellContainer25 #ShellconLeg #FoldingLegs #Legs #Leg #ShelfContainer #Container