Pickup is around Iwatsuki Interchange or Saitama Stadium. Delivery within ~30km is 3000 yen. Delivery within 40km is 4000 yen. There are two barbells in the picture... only one of them! If you don't need it, it's 1000 yen off. Image of the power rack's width... Just shown for clarity. The barbell is basically for pickup or if I deliver it. Manufacturer unknown Power rack 75x75 114x106x209 Approximate dimensions. Quite a compact type for 75x75! Rack 30mm solid wood Safety bar 28mm solid wood Chin-up bar 28mm solid wood The chin-up bar is generally hollow pipe, so it's quite sturdy! The safety bar is generally 25mm, similar to IROTEC's 455. Frame is 75x75... But it doesn't have the thickness of Rogue or MBC. About the same thickness as 60x60. 2 frame covers are missing. The last picture shows holes that were not originally used... The previous owner drilled holes to try to attach something, so there are holes. I don't think there are any particular strength issues. Shipping within Honshu is... Around 13,000 to 15,000 yen. Even at the cheapest, it will cost over 12,000 yen. The sample barbell is... 180 wide Approx. 220 Olympic shaft. The power rack in the picture is just loosely assembled because I was lazy. When assembling, please loosely assemble first, then tighten fully. It is currently disassembled. The safety bars are the pull-out type, so you need over 1m of space in front. I've also described this item in the comments section, so check it out if you have time.