Thank you for viewing. Purchased this month (September 2023), stored at home. Retail price: 7150 yen ↓ The following is a quote: [Product Features] For the love of artists' works, This resin liquid is made in Japan, high quality, and yet affordable!! ■ Less shrinkage than any other resin liquid. Therefore, it is less likely to wrinkle. Even with the most difficult diamond silicone molds, you can clearly express the sharp points and unevenness. Perfect for mineral art. ■ Smooth, low viscosity for easy handling, less likely to trap air bubbles, and easy to remove them. ■ Does not become sticky after curing, and cures firmly. ■ Excellent transparency and less yellowing. ※ During curing (while the resin liquid is reacting under UV or LED light, it appears yellow, but it becomes transparent when the reaction is complete and settles down). ■ The smell is mild! We have reduced the pungent smell unique to resin! (There is a small amount of smell. If you are concerned, please ventilate well while using the resin.) ■ Cures well even in sunlight. Although discoloration unique to resin may occur due to aging, there was no change in the experiment even after 3 months. [Notes on Lights] This is a one-component resin that cures with UV-LED lights (405nm wavelength) and UV lights (365nm wavelength). When using an LED light, a wavelength of either "405nm" or "365nm" is required. Please also be aware of the deterioration of the light itself, as the waveform may become unstable due to differences in manufacturers and aging, resulting in longer curing times or incomplete curing. [Curing Time] ● UV-LED light (when using 6W～9W) 60～120 seconds ● UV light (when using 36W) 2～4 minutes (Varies depending on the thickness of the work and the season) ※ When coloring with general resin colorants, irradiate for longer than the above time. The curing time will be longer as the resin becomes thinner. ※ If the work is thick, turn it over and irradiate with light to fully cure it.