Thermos Bottle Koharu Water Bottle Higuchi Yuko Boris Zakkaten Unused The same Koharu illustration is drawn on both sides. After purchase, it was stored unopened in a dark place and was opened for the first time for this listing. As far as I could visually confirm, the thermos bottle has no scratches or stains. The cosmetic box is generally in good condition for an experienced item, but there are some minor scratches. *Please refrain from purchasing if you are looking for a perfect item, as it is a home-stored item. It will be shipped via Yu-Yu Mercari Mail Yu-Pack (anonymous delivery). It will be wrapped in a plastic bag and cushioning material, and then shipped in a cardboard box. *Please check the profile. The following is from the official website ↓ With original packaging [Size] φ68 x 222mm [Specifications] Stainless steel portable thermos bottle Actual capacity: 500ml Heat retention: (24 hours) 29℃ (6 hours) 58℃ Cold retention: (24 hours) 15℃ (6 hours) 8℃ Inside the main body, inner bottle: Stainless steel Outside the main body, body: Stainless steel Lid: Polypropylene Lid body: Polypropylene, ABS resin Packing: Silicone rubber [Precautions for use of printed parts] Do not put the printed surface in your mouth or lick it. The printed surface may peel off due to strong impact or strong friction. [Precautions for use of the main body] Before use, wash the main body, lid body, and lid thoroughly with a neutral detergent. When bleaching the inside of the main body, do not use chlorine bleach. Also, be careful as the paint may peel off if bleach adheres to the outside of the main body. After use, wash with a sponge with a neutral detergent, wipe off the water well, and dry. Do not use a scrubbing brush or polishing powder as it may cause scratches, and if scratches are made, it may rust. Do not soak or boil. *Dishwashers, microwave ovens, and direct fire cannot be used. The packing is basically a part that is not intended to be removed. Repeated attachment and detachment can lead to stretching and deterioration, weakening the airtightness and causing leaks, so It was recommended to use it without removing it during normal cleaning. If you are concerned about dirt, you can keep it clean by washing the grooves with a soft brush or cotton swab.