Thank you for viewing. This is a listing for one finished bassoon reed. ・Reed Dimensions Blade: Approximately 28mm Tube: Approximately 30mm Total Length: Approximately 58mm The shaper used is Rieger No. 1a (tip width 15.50mm). ※Rieger No. 1a is an orthodox type of shaper that combines a unified tone with a rich resonance. ・Materials French Neuranter (Material origin: France) It has a slightly bright, flexible tone with a lot of vibration. The hardness is selected and used from materials with a hardness of 13-18 (slightly hard to slightly soft) on the Reeds'n Stuff hardness meter. To minimize changes after finishing, it takes about two months from assembly to finishing. During finishing, the reed is carved so that the p (piano) articulation responds without problems, and a wide range from low to high notes can be played with good balance, from p to f (forte). The reed is finished so that a vibrant tone is maintained even when playing at f. Therefore, it is mainly suitable for intermediate to advanced players, such as: ・Those who want to blow a little harder ・Those with a large lung capacity ・Those who like reeds with resistance ※Since the reed has been test-played during finishing, it is listed as "Like New". #Bassoon #Bassoon