Thank you for viewing! This is a 【Set of 2】: 《Standard Type》 and «Lightweight Type»! 《Standard Type》 ・Total Length: Approximately 310mm ※From the 1st support pillar to the Yaen tip: Approximately 200mm ・Support Pillar Height: Approximately 20mm (Main 2nd support pillar) ※All support pillars: One-touch type, self-designed ・Uses ultra-hard stainless steel wire: 1.0mm ・Pre-made barb: M x 2, L x 2, a total of 4 barbs x 3 pieces used ・Weight: Total 0.8 go For progress: 0.3 go For jump-up assistance & balance: 0.5 go ・Resistance plate: 0.3mm thick stainless steel plate used ・Chemi-hotaru attachment (Yes) «Lightweight Type» ・Total Length: Approximately 250mm ※From the 1st support pillar to the Yaen tip: Approximately 180mm ・Support Pillar Height: Approximately 20mm (Main 2nd support pillar) ※All support pillars: One-touch type, self-designed ・Uses ultra-hard stainless steel wire: 1.0mm ・Pre-made barb: M x 2 x 3 pieces used ・Weight: For jump-up assistance & balance: 0.3 go ・Resistance plate: 0.3mm thick stainless steel plate used ・Chemi-hotaru attachment (Yes) This Yaen's motto is: If it reaches the target, it will hook with a high probability! ※When the squid dislikes the approach and resists... ※When the squid notices the Yaen and releases the bait (horse mackerel) and escapes... Even in such cases, it hooks "automatically". ※"Hooking Yaen" where you can enjoy hooking and firmly catching the squid. This Yaen was completed through trial and error and actual fishing, from the desire to have both. I will omit the explanation of the Yaen due to the limited number of characters m(_ _)m If you are interested... Please refer to the description of the 《Standard Type》. Because it is handmade, there may be variations in dimensions and some scratches. I work carefully, but it is not a commercial product, so if you are looking for perfection, I recommend purchasing a ready-made product. My work is irregular, so replies may be delayed, but if you have any questions, please feel free to comment.＾＾ #YaenFishing #AoriIka (Spear Squid)