These are vertically-elongated eyes made for Dollfie Dream size dolls. The materials used are glass, acrylic, resin, etc. They are generally small, with a diameter of 14mm, made to fit the eye width as closely as possible. Overall diameter: 14mm Iris width: Approximately 10mm Please consider whether they will fit your doll before purchasing. Use Blu-Tack or similar adhesive to secure them. They have almost no tracking ability (following movement). The model in the photos is a DDH-16 without any eyelid modification. From the fourth photo onwards... specifications. ◎ They are designed to prevent the eyes from looking sunken, even when worn by dolls with heavy eyelids. ◎ The iris is not simply a printed image cut out, so there are no cutting lines around the iris. Due to the shallow curve of the cabochon, they can be used with various 1/3 scale dolls. It may be difficult to use them with dolls that have eye bags. The colors are deep blue and sand brown. There is a lump of resin on the side, but it does not interfere with wear, so they are sold as a set of two. Please be aware that there may be chips or minor scratches on the parts, and as they are handmade by an amateur, there may be air bubbles or resin overflow. BJD MJD Smart Doll Cast Doll DOLK Volks AZONE