This is a kiseru (Japanese pipe) stand made of paulownia wood. Since it's made of paulownia, it doesn't have a very heavy feel. It has been coated with persimmon tannin four times. The color is a bit light. Please note that the kiseru in the photo is for photography purposes and is not included with the product. The size that can be used stably is from 12cm to 30cm in length and up to 10mm in diameter. (12mm can be used, but it will be a tight fit.) Using pipes longer than 30cm is possible, but it will be out of the standard. Versatile Use It can be used not only for kiseru but also as a stand for design cutters or pens. Notes About the Material Paulownia wood is used, and it is not very durable, so please handle it with care. It is weak to moisture and water, so avoid using it in humid places. Customizable It is already painted with persimmon tannin, but it has almost no water resistance. You can use your favorite paint. Aging of Persimmon Tannin The color will deepen over time, and the natural texture will increase. About the Shape Paulownia wood is lightweight and easy to handle, and it exhibits sufficient strength in normal use. However, please understand that there is a risk of damage if excessive force is applied, as paulownia wood is not extremely strong. When assembling the base, assemble all the sides with the markings so that they are on the left side when viewed from the front. [About Assembly] The support posts have markings on the bottom side, indicated by a pencil mark. It can be used as is, but the fit is basically loose, so it is recommended to glue it with adhesive. Product Specifications Assembled Dimensions: Length: Approximately 11cm Width: Approximately 17cm Height: Approximately 9cm Thickness of parts: Support posts approximately 5mm Thickness of base approximately 10mm Thickness of hanging part approximately 10mm Material: Paulownia wood Packing and Shipping Shipping method: Yu-packet Post Packing contents: Bubble wrap, plastic bag, and envelope, delivered disassembled. Please note: Refer to the kiseru in the photo (total length approximately 21cm, bamboo part diameter approximately 9mm). Since natural wood is used, warping may occur. Some adhesive is used. It is created by laser cutting. Some removal of resin and scorching has been done, but some scorching and resin stains remain. The surface has a rough feel. Because it is a handmade product, the finish is quite rough. If you are looking for perfection, please consider a genuine product. The kiseru is not included with the product.