Price negotiable. This is a 1/350 scale model of the Taiho, a carrier. It was made by a complete amateur, so as the photos show, there are imperfections such as gaps in the elevators and the front deck not being completely flush. Also, not all of the anchors are present. The chains are hanging from the port side as they are. Aircraft are not included. Please be aware. Dedicated etching parts were not used. Only the bridge section is decorated with general parts. The communication antenna is not installed. Regarding the crane, because the crane cover did not attach properly, the crane is attached directly on top of the crane cover. The inside of the elevator is as shown in the photos, but in its original state, the elevator would fall down, so an H-shaped plastic plate has been used to prevent it from falling. I will take care when packing, but there is a possibility that parts may come loose during transport.