Thank you for viewing this product. Please read the profile section before purchasing. --------------------------------------------------- This is a listing for [Mini 4WD Catcher Damper]. ■ These are cut from Tamiya's genuine Mini 4WD catcher, black. They can be used without restrictions from daily practice to Tamiya official competitions. --------------------------------------------------- [Product Details] * Total length → Approximately 60mm * Center of mounting hole to rear end → Approximately 35mm * Can be used with the popular MS FlEX, FM-A chassis, etc. * Sufficient effect can be expected with a light weight of about 1g to 1.5g! * This is a long-stroke type catcher damper that is mounted using the position of the rear bumper mounting hole. * The included tension plate can maintain the initial position of the catcher. Also, it can prevent excessive bending downwards, so please use it to adjust the traction on the chassis. * Genuine catchers are used. Please note that vertical creases may appear as shown in image 7, or the product's characters and pressed patterns may be randomly included as shown in image 8. The cutting position cannot be specified. * The images are samples. Please note that the cutting may not be from the same location. * Tamiya genuine catchers other than black are also cut in limited quantities. If you wish, please be sure to consult us in the comments before purchasing. The available colors for production are the 5 colors shown in image 9. * From the following tags to the Mini 4WD product list ↓↓↓ #tsumugu's Mini 4WD related listings * Click here for a list of typeH products only ↓↓↓ #CatcherDampertypeH --------------------------------------------------- [Handmade by an individual.] There may be individual errors in size, cut lines, and hole positions. Also, fine fluffing may remain from the cutting, so please understand. Please refrain from purchasing if you are overly concerned. Please purchase only if you agree after confirming the images. Please ask if you have any questions. [Search Keywords] Tamiya mini4wd Mini 4WD Catcher Damper Mass Damper Double Shaft Single Shaft [Management No. 160]