This is a pre-clip tool for climbing. There are two ways to use it: ① Hanging a quickdraw with the rope already attached Hook it with the carabiner gate open, and pulling down will close the gate. ② Clipping the rope to a quickdraw that is already in place With the rope wrapped around the gate, pulling one side of the rope will push the gate open and clip it. [Tips for Use] ・When lifting, hold the rope (both sides) together with the pole, as the rope may slip due to its weight. ・When clipping to the gate, hold one side of the rope with the pole and pull the other rope with your other hand. This product comes with a swivel mount, allowing it to be used with selfie sticks that don't have a swivel function. It is compatible with the standard screw (1/4 inch screw) of selfie sticks for action cameras, etc. *You can search for "1/4 selfie stick" on AMAZON, etc., and they are sold from around 1000 yen. Please select a swivel type. (A type that attaches to the tip of the PAMO brush is also sold separately) Both wire gate and key lock gate carabiners can be used. *Only the pre-clip attachment is included; quickdraws and poles are not included. *Selfie sticks are also sold separately. It can be used without problems if the gate width is about 11-12mm, but we can also make it to fit other sizes if you wish. Made with a 3D printer, please understand that minor imperfections that do not affect functionality may be present.