SIMWORKS by NITTO Obento Rack　Retail Price: ¥26,400 Used for about six months. There are several paint chips at the base of the rod attachment on the front of the rack (Photos No. 4-6). Otherwise, it is in good condition. The connection rods have been cut from their original length. The current lengths are 225mm (2 rods) and 265mm (2 rods), for a total of 4 rods. Two unused clip bands (22mm x 2) are included. ----------------- [SPEC] Material: 9 mm CrMo Steel Tube / Main Frame Weight: ave. 635 g Maximum Load Capacity: 5 kg Color: Black Manufacturer's Description: For everyday use and light touring, with a simple form and function. This simple front rack, designed to allow more cyclists to use the popular Potluck Rack, features a compact table the size of a six-pack, the same size as the Potluck Rack. It comes with 420mm extra-long connection rods and clamps to fit any front fork, so it can be used even without end eyelets or eyelets. If you are lucky enough to have mid-eyelets on your fork, you can cut off the rods during installation to the appropriate size. Also, if you are lucky enough to have a frame size that fits and a hole in the rear stay bridge, it can also be installed as a rear support back, but some processing work is required. It has a form that is a best match for SimWorks' standard rear rack, On The Road Carrier. Let's hurry to that hill after tying up the Obento box! *This product is designed as a front bag supporter, and its original purpose is to support the lower part of a bag hung from the handlebars, etc. When using it to carry luggage by itself, please be careful of the load capacity.