This is a custom-made, extra-thick garrison belt made with high-quality, full-grain leather (Shonan Benz leather) and hand-dyed in all-black. The buckle is made of solid brass, plated with pure silver, and then painstakingly treated with a sulfide finish for an authentic, aged look. While it has a brown core, the surface is thoroughly dyed, so the brown color is unlikely to show through easily. Color-fastening treatment has been applied, but color transfer may occur due to friction, so please be careful of color transfer to items that rub against the belt. Leather Thickness: Approximately 5.0 mm Leather Width: Approximately 39 mm Color: All Black (Brown Core) Tanning: Long-term pit-tanned vegetable tanning, high-fat content Leather Part: Steerhide Benz (the part of the cow's rear and back that doesn't stretch easily) G36 Buckle: Pure silver plating (base metal: brass) Fastening Screws: Nickel plating (base metal: brass) Please provide your size and tip shape based on the following information. For the size, please refer to the images and specify the length from the buckle pin to the center of the 5th hole (the 3rd hole). To measure the size, lay your current belt flat and measure the length from the buckle pin to the hole or position where it fits perfectly. The pin holes (oval) are spaced 2.5 cm apart, with 5 holes in total. The maximum size you can specify is around 100 cm at the center of the 5th hole. If your size exceeds 100 cm, please inquire before bidding to check stock availability. Choose the tip shape from the images (A, B, C, D). For information on buckle types, replacements, and exchanges, please refer to the following URL: https://money.daa.jp/bk/ Due to the use of steerhide (bulls over 2 years old), there may be natural markings (vertical wrinkles) and scratches, but these will gradually become less noticeable with use. Notes: This is an original product. Please be careful of color transfer due to friction. The images are samples, and the color and specifications may differ slightly. The size may vary by approximately ±5 mm due to differences in measurement positions. The leather thickness may vary by approximately ±0.2 mm depending on the skiving process and finishing conditions. This is a made-to-order product, and it usually takes 3-7 days to ship.