Introducing the Epiphone Genuine ProBucker Mini Humbucker Set. Similar to the FB720, which has no pole pieces, these humbucker pickups are made in a mini-humbucker format with ProBucker specifications. The nickel cover gives it a vintage feel, and the adjustable pole pieces allow for volume adjustment of each string. These are made with genuine construction using Alnico magnets, not the typical ceramic magnets. The lead wires also use braided wire, making them comparable to genuine Gibson mini-humbuckers. Output is approximately 6.4k for the neck and 7.8k for the bridge. Lead wire length is 420mm for the neck and 260mm for the bridge. Cover size: Width: 68mm, Height: 28mm, Depth: 15.7mm (excluding base plate feet) The pole piece pitch is 49.2 mm (center to center from the 1st to 6th string) for both the neck and bridge, which is Gibson pitch. The screws are metric. This set includes elevation screws, screws, and dedicated black escutcheons. The escutcheons alone are worth around 2000 yen. They can be used by directly inserting the screws into the body or inserting them into dedicated stays. Please note that they are completely different from P-90s and are not compatible. Please refer to the size chart. The protective seal on the top surface comes in two types: one with text and one without text (transparent). Which one is shipped depends on the stock availability, so please understand.