Alnico V magnets, a step up in specs with nickel-silver baseplates. This is a versatile set with 4-conductor cables, short legs, and a wide pitch rear pickup with high resistance. These are outlet pickups purchased for maintenance. I have extras, so I'm putting them up for sale. ※The images are samples. The color of the cables and appearance may vary. If the cable sheathing is damaged, it may be protected with heat shrink tubing, so please be aware of this. Although these are unused, they are outlet items and may have scratches, dents, rust, chips, peeling, paint lifting, uneven finishes, etc., due to shipping, storage, or manufacturing. Please do not purchase if you are looking for a pristine item. I find them useful because they are inexpensive and reasonably functional. The resistance value varies depending on the lot, so please inquire if you have specific requirements. There will always be some error. Screws and springs are included. ※Please install pickups and other components at your own risk, as it is considered a modification. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. As these are imported goods, the purchase price and individual specifications will vary depending on the time of acquisition, so the images are samples, and the exact same items will not be delivered, and the price will also fluctuate. Please do not purchase if you are concerned about minor details such as "it used to be like this," and we will not accept returns for minor issues unless the item is unusable. The color of the cables, cords, and other parts will change from time to time. If the length is insufficient, please add to it. Please ask questions beforehand and make sure you understand the details, such as whether the pole pieces protrude from the back, the length, etc. Some adjustable pole pieces may not have screw threads, so height adjustment can only be done by pushing from the front and back. The specifications, such as the screw head type (pan head or oval head), length, and spring shape, are constantly changing, so the same items cannot be provided. The mounting ears for the screws may bend during shipping, but they can be bent back, so please correct them yourself before use. Metal will break if bent repeatedly.