This is a mid-tracker wallet crafted exclusively from Chromexcel leather from the American Horween Leather Company. Made from approximately 2.3mm thick leather, it has a solid presence. The zipper is a MADE IN USA 42 Talon zipper. This is a rare, completely original deadstock item made from the 1960s to the 1980s. It is not a reproduction. It is made of brass with an auto-lock mechanism, and the tape color is black. The chain is an iron mantel chain, with a wire diameter of 2.5mm and a width of approximately 9mm. Each link is soldered, making it extremely durable. Tracker wallets using soldered iron chains are rare, so this is highly recommended. The plating is smooth and has a beautiful texture. The length is approximately 45cm, including the belt loop and S-hook, and is already attached. It can be removed with pliers. The dot hook is from Celux. The sewing thread is hand-sewing wax linen thread from the Irish company, Crawford. The stitching is a robust saddle stitch, hand-sewn with a 3.3mm pitch. We are committed to all the raw materials and manufacturing methods. Size: Approximately 15cm wide, 9.3cm long, and 1.4cm thick. One card pocket One coin pocket Two bill compartments Color: Black *The products are made using natural leather, so there may be scratches, wrinkles, and stains inherent to the material. Also, depending on the leather, it may be susceptible to water and sweat absorption, and scratches, so please be careful when using it. #TrackerWallet #BikerWallet